Traveller Type S Scout/Courier
Created by
-
$ 75,126
raised
-
856
pioneers
Campaign Closed: Mon, April 04, 2022 at 09:00 AM GMT
- Pledges (9)
- Add-ons (19)
-
$75,125.70
raised
-
856
pioneers
Tiers
8 pioneers
USD 25.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Type S Scout/Courier, 15mm edition for that classic traveller experience. This pledge does not come with any other stretch goals or miniatures, just the ship itself. Preview version available now, full release in September. INCLUDES: - 15mm Type S Scout/Courier Ship
36 pioneers
USD 25.00
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Pledge for just the crew miniatures and their stretch goals. INCLUDES - Character Miniatures - Character Miniature Stretch Goals
120 pioneers
USD 40.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Get a copy of the Type S Scout Ship and Ship Stretch Goals INCLUDES - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Ship Stretch Goals
129 pioneers
USD 60.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Get the Type S Scout Ship and Character Miniatures, plus all their related Stretch Goals INCLUDES - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Character Miniatures - Ship Stretch Goals - Character Miniature Stretch Goals
262 pioneers
USD 90.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Deck Designer
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
The Mac version has some permissions issues with installation, please contact deckdesigner@2nddynasty.com for installation support.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Exclusive Add-Ons
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
[Early Bird ended at July 10th, 15:00 UTC] Get the Type S Scout Ship, Character Miniatures and their related Stretch Goals, as well as all the Exclusive Add-Ons. INCLUDES - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Character Miniatures - Ship Stretch Goals - Character Miniature Stretch Goals - Beta Centauri-Class Fast Trader - Imperial Battledress Miniatures Pack - Air Raft Variants - T5 Turrets Pack - Deck Designer
461 pioneers
USD 100.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Exclusive Add-Ons
Get the Type S Scout Ship, Character Miniatures and their related Stretch Goals, as well as all the Exclusive Add-Ons. INCLUDES - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Character Miniatures - Ship Stretch Goals - Character Miniature Stretch Goals - Beta Centauri-Class Fast Trader - Imperial Battledress Miniatures Pack - Air Raft Variants - T5 Turrets Pack - Deck Designer
67 pioneers
USD 225.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Chimera KS Edition
USD 75.00
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
Chimera contains approximately 400 parts and more than 100 unique parts.
Get the Starship Chimera STL files and all campaign stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Transport Delta KS Edition
USD 40.00
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Includes seven ship variations!
Chimera Cerberus
USD 30.00
CURRENT VERSION: 1.1
A Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Chimera Pathfinder
USD 34.95
CURRENT VERSION: 1.0.9
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
NO STRETCH GOALS INCLUDED
This is Starship Chimera Pathfinder only!
INCLUDES:
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
Paint and customisation by Brian Jenkins
Chimera Pegasus
USD 25.00
CURRENT VERSION: 1.0.2
A Chimera variant for transporting civilians from one planet to another.
⠀
⠀
⠀
⠀
Scout Ship Beta KS Edition
USD 50.00
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The scout ship has moderately sized parts, with options for large prints to print with less parts
Contains over 80 parts
Largest part is 129×125×97mm (5×5×3.8")
There are some additional margins if parts are rotated, etc.
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Includes eight ship variations!
Shuttle Alpha KS Edition
USD 25.00
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
You can also modify your Space Shuttle Alpha with seven different variants.
Sleipnir KS Edition
USD 40.00
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
You can find the lighting kits here.
We now have added a bonus miniature of the ship and the Notinante configuration! Enjoy!
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Exclusive Add-Ons
All Ships
Please note, the download for these ships are actually shared separately in individual series product downloads (kickstarter editions)
Starfighter I & II
USD 30.00
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. This add-on has our two Starfighter-pack included, compatible with each other to offer even more starfighter variants.
⠀
⠀
⠀
Get all the benefits of the TAS Membership pledge level, plus, the kickstarter editions of all our past ships. INCLUDES - Character Miniatures - Character Miniature Stretch Goals - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Ship Stretch Goals - Air Raft Variants - Beta Centauri-Class Fast Trader - Imperial Battledress Miniatures Pack - T5 Turrets Pack - Shuttle Alpha KS Edition - Scout Ship Beta KS Edition - Transport Delta KS Edition - Chimera Pathfinder - Chimera KS Edition - Chimera Pegasus - Chimera Cerberus - Sleipnir KS Edition - Deck Designer
7 pioneers
USD 350.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Exclusive Add-Ons
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
Deck Designer
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
The Mac version has some permissions issues with installation, please contact deckdesigner@2nddynasty.com for installation support.
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Traveller Commercial License - Add-on
USD 250.00
We realise that many Traveller fans may not have access to a 3D printer. While anyone who purchases our STLs has the right to get their files printed somewhere, we have worked alongside Far Future Enterprises to provide a commercial printing license as an add-on for small 3D printing companies.
This takes the form of a special add-on which extends your non-commercial license for anything purchased in this crowdfunding campaign (including older 2nd Dynasty models) for a period of 1 year from purchase. During this period, anything you print may be sold, although under no circumstances may you sell or redistribute digital files. You may of course sell items you have printed after the expiry period, so long as they were printed during the licensed period.
This license is for small-scale operations only. You may not produce molds or sublicense production to a third party.
Get all the benefits of the TAS Membership pledge level, plus commercial license for a period of 1 year. INCLUDES - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Character Miniatures - Ship Stretch Goals - Character Miniature Stretch Goals - Beta Centauri-Class Fast Trader - Imperial Battledress Miniatures Pack - Air Raft Variants - T5 Turrets Pack - Deck Designer - Traveller Commercial License
48 pioneers
USD 400.00
15mm Type S Scout/Courier
Looking for that classic feel with your Traveller needs? This Type S Scout/Courier is optimised for 15mm printing on FDM or resin printers.
The Type S is an officially licensed model from the Traveller Role-Playing Game universe. It first made its appearance way back in 1977. Now you can relive past or make new adventures in your own Type S. This version is a lot easier to print and paint than our full 28 mm version.
PLEASE NOTE: Currently we have provided the fully printable version. However, hinged parts may not print well on FDM with a 0.4mm nozzle, but are functional at 0.25mm and 100 microns/0.1mm layer heights. Supports and drainage holes will be needed for resin.
Chimera KS Edition
USD 75.00
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
Chimera contains approximately 400 parts and more than 100 unique parts.
Get the Starship Chimera STL files and all campaign stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Transport Delta KS Edition
USD 40.00
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Includes seven ship variations!
Chimera Cerberus
USD 30.00
CURRENT VERSION: 1.1
A Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Chimera Pathfinder
USD 34.95
CURRENT VERSION: 1.0.9
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
NO STRETCH GOALS INCLUDED
This is Starship Chimera Pathfinder only!
INCLUDES:
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
Paint and customisation by Brian Jenkins
Chimera Pegasus
USD 25.00
CURRENT VERSION: 1.0.2
A Chimera variant for transporting civilians from one planet to another.
⠀
⠀
⠀
⠀
Scout Ship Beta KS Edition
USD 50.00
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The scout ship has moderately sized parts, with options for large prints to print with less parts
Contains over 80 parts
Largest part is 129×125×97mm (5×5×3.8")
There are some additional margins if parts are rotated, etc.
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Includes eight ship variations!
Starfighter I & II
USD 30.00
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. This add-on has our two Starfighter-pack included, compatible with each other to offer even more starfighter variants.
⠀
⠀
⠀
Shuttle Alpha KS Edition
USD 25.00
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
You can also modify your Space Shuttle Alpha with seven different variants.
2nd Dynasty Turrets
USD 20.00
Turrets Pack I, II and III all rolled into one for some variety on your Type S turret mount.
Modular Deckplans Collection
USD 120.00
Create your own starship deckplans with these tiles from Starship I and II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
⠀
⠀
⠀
⠀
2nd Dynasty Miniatures
USD 60.00
This package includes 65 character miniatures from the 2nd Dynasty's catalogue.
⠀
Sleipnir KS Edition
USD 40.00
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
You can find the lighting kits here.
We now have added a bonus miniature of the ship and the Notinante configuration! Enjoy!
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Miniatures
28 mm Traveller themed miniatures with sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Includes Travellers, Jade, Marshal, Asha, Nat and Doc, and a mixture of 10 Vargr soldiers and pirates, as well as small bases to allow for easy movement in the tight quarters of the Type S.
Can be scaled down to 15mm on resin printers, or up as large as you like.
Character Miniatures Stretch Goals
Miniature stretch goals for the Traveller crowdfunding campaign, sculpts by Papsikels, Kuoshenoko Miniatures and Flavored Pickle.
Most recent version: 0.9. Fixed missing poses for Jade, Marshal and Doc
Outstanding: One sitting pose for Nat, two commissioned miniatures.
Type S Scout/Courier
The Type S Scout/Courier in all its glory. Scaled for 28mm / 1:59 tabletop action, it is detailed inside and out, and includes instructions for assembly.
Current Verison: 1.1.7 - Optimised the air raft
Type S Stretch Goals
The stretch goals for the Type S, including a variety of alternative parts, are now fully released, and include the following:
- Decal Sheets
- Snub Nose
- Alternative Engine Cone Variants
- Alternative Landing Gear Variants (instructions coming at a later date)
- Winglets
- Turrets
- Airlocks
- Partitions (and bonus Partitions and Hatches by user Shadow Liger)
- Assorted Cargo
Exclusive Add-Ons
Deck Designer
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
The Mac version has some permissions issues with installation, please contact deckdesigner@2nddynasty.com for installation support.
All Ships
Please note, the download for these ships are actually shared separately in individual series product downloads (kickstarter editions)
All 2nd Dynasty Add-Ons
Get the benefits of the TAS Membership plus every single add-on in this campaign except for the Traveller Commercial License (light kits are also not included and must be purchased separately). INCLUDES - Character Miniatures - Character Miniature Stretch Goals - Type S Scout Ship - 15 mm Type S Scout Ship - Twin Seat Air Raft - Ship Stretch Goals - Air Raft Variants - Beta Centauri-Class Fast Trader - Imperial Battledress Miniatures Pack - T5 Turrets Pack - Shuttle Alpha KS Edition - Scout Ship Beta KS Edition - Transport Delta KS Edition - Chimera KS Edition - Chimera Pathfinder - Chimera Cerberus - Chimera Pegasus - Sleipnir KS Edition - Modular Starfighter System I & II - Deck Designer - 2nd Dynasty Miniatures - Modular Deckplans Collection - 2nd Dynasty Turrets
Add-ons
Imperial Star Marines in TL 15 Battledress
USD 20.00
A series of six Imperial Star Marines in TL15 Battledress. Presupported variants optional.
Air Raft Variants
USD 10.00
The base Type S comes with a small two-seater Air Raft by Mikael Blomkvist. This add-on adds four seater and tray back options with a Saloon, Coupe and Pickup variant.
Latest Version: 1.0.1 - Added missing dashboard STL.
Air Raft, Hover Vehicle, Flying Car,
Beta Centauri
USD 30.00
A total conversion of our Scout Ship Beta into a Traveller universe variation called the Beta Centaur. This standalone version will include everything you need to build this underweight 200 ton ship which is a compromise between the speed of the Type S Scout and Type A Free Trader. More details soon to follow.
Prototype available now!
T5 Turrets
USD 15.00
A collection of compatible turret pieces based on the turret art from T5 Traveller.
Beta Centauri Upgrade
USD 15.00
An upgrade version of the upcoming Beta Centauri for those who already own Scout Ship Beta.
Prototype has been released, with 1.0 coming soon
2nd Dynasty Miniatures
USD 60.00
This package includes 65 character miniatures from the 2nd Dynasty's catalogue.
⠀
Shuttle Alpha KS Edition
USD 25.00
Need a way to get your units from the ground to orbit? This shuttle is fully modular and can be configured as a dropship, cargo shuttle, or even a small star ship. More than a mere deck plan, this product includes a full scale (sized to 28mm miniatures) fuselage complete with manoeuvring thrusters, sensors, landing gear and articulated main thrusters for VTOL operations.
Modular interior – customise the layout however you like using other Starship or compatible tiles
Alternate parts for large and small print beds
High and low detail versions
Contains over 50 pieces
Low support requirements
You can also modify your Space Shuttle Alpha with seven different variants.
Scout Ship Beta KS Edition
USD 50.00
Explore deep space and final frontiers with this full 28mm scale scout ship, designed stock-standard for long haul endurance scout missions. Includes two manned turrets for defending in rough territory, a full sensor suite package for scanning new systems, a well equipped engineering section, cargo hold, living quarters and a 5-station forward bridge.
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The scout ship has moderately sized parts, with options for large prints to print with less parts
Contains over 80 parts
Largest part is 129×125×97mm (5×5×3.8")
There are some additional margins if parts are rotated, etc.
Create your own full scale printable 3D scout ship, with modular interior and cutaway structure!
Includes eight ship variations!
Transport Delta KS Edition
USD 40.00
Current Version: 2.0 (Delta 1700-Series) (22/12/2023)
Cruise the hyperspace lanes in this high-speed transport. Haul cargo - legal or illicit - with two massive engines to get you from point A to point B. Manoeuvre with the fluidity of repulsor technology and defend yourself with manned or unmanned turrets and a powerful shield generator.
Create your own full scale printable 3D transport craft, with modular interior and cutaway structure!
The ship is detailed inside and out and a variety of configurations can be used to customise the deck plans
Modular interior – customise the layout however you like using other Starship or compatible tiles
The transport has larger parts, and requires a medium sized print bed that can fit 215mm/8.5 inches
Contains over 80 parts
Largest part is 176×62×140mm (7×2.5×5.5")Can be rotated to fit 156×140×140mm (6.1×5.5×5.5")
Longest part is 215×155×35mm (6×8.5×1.4”)
There are some additional margins if parts are rotated, etc.
Includes seven ship variations!
Chimera Pegasus
USD 25.00
CURRENT VERSION: 1.0.2
A Chimera variant for transporting civilians from one planet to another.
⠀
⠀
⠀
⠀
Chimera Cerberus
USD 30.00
CURRENT VERSION: 1.1
A Chimera variant for patrolling the space lanes. Featuring 9 gun emplacements, two torpedo tubes, three powerful engines, and much more, the Cerberus is a fantasitc hero ship for your sci-fi tabletop games.
28-mm scale (~1/60), this ship is an impressive hobby project on its own that will keep you busy for weeks, and a fantastic prop or hero piece to add to your tabletop.
Parts are compatible with the Chimera and Pathfinder standalone ships.
Chimera Pathfinder
USD 34.95
CURRENT VERSION: 1.0.9
Get the Starship Chimera Pathfinder, a smaller, distinct deep space exploration ship. Fully detailed interior and compatibility with other Chimera parts, but with one important caveat:
NO STRETCH GOALS INCLUDED
This is Starship Chimera Pathfinder only!
INCLUDES:
Starship Chimera Pathfinder STL Files
Non-Commercial Printing License
Paint and customisation by Brian Jenkins
Deck Designer
USD 15.00
We have developed this software to help make building and customising ships both easier for ourselves and for our customers. Amongst other things, it features:
- Load standard layouts for existing 2nd Dynasty ships and variants
- Provide a print list for you to print off parts on your 3d printer
- User can import additional parts and import them into the program
- Supports importing other STLs from 3rd parties
Currently, we support the following ships directly:
- Sleipnir
- Chimera Cerberus
- Transport Delta
- Official Traveller Type S Scout Ship
- Starfighters I
Some Mac computers report the app is damaged. If this occurs reach out to deckdesigner@2nddynasty.com for assistance.
Chimera KS Edition
USD 75.00
The stock Chimera is a cargo hauler's dream, allowing you to transport supplies to far off colonies, deposit tactical vehicles in hostile territories, or bring back artefacts from alien worlds.
The Chimera is detailed inside and out and a variety of configurations can be used to customise the deck plans that include three decks standard.
Chimera is an original, fully 3D-printable spaceship scaled for 28mm play in your favourite Tabletop RPG, Wargame or display. Compatible with the OpenLOCK system created by and available at Printable Scenery.
Please note that these are STL files only!
Chimera contains approximately 400 parts and more than 100 unique parts.
Get the Starship Chimera STL files and all campaign stretch goals.
Includes:
Starship Chimera STL Files
Starship Chimera Stretch Goal STL Files
Starfighter I & II
USD 30.00
Make your own customisable starfighters, combining engines, wings, weapons systems and more, suitable for use with 28-32mm miniatures. This add-on has our two Starfighter-pack included, compatible with each other to offer even more starfighter variants.
⠀
⠀
⠀
Modular Deckplans Collection
USD 120.00
Create your own starship deckplans with these tiles from Starship I and II Kickstarter! Allows the construction of generic starship corridors, rooms or other sci-fi themed constructions. Suitable for use with 28-32mm miniatures.
⠀
⠀
⠀
⠀
2nd Dynasty Turrets
USD 20.00
Turrets Pack I, II and III all rolled into one for some variety on your Type S turret mount.
Sleipnir KS Edition
USD 40.00
Current Version: 1.2
- Updated clips to our modernised versions which provide options for tightness vs. snapiness
- Removed the misaligned supports from Deck 03 angled hull pieces and made the parts print support free with no overhangs
- Added a combined angled hull piece
- Fixed a few orientation issues with STL files
The Sleipnir is a massive, 11-deck 28mm scale spaceship for your tabletop scifi games. Detailed inside and out, it features the OpenLOCK clip system to create a fully modular design. Each deck stacks atop the other, for easy assembly or can be laid out on the table for easy play access. Complete with print-in-place retractable point defence cannons and designed to take lighting in the engine and airlock room.
You can find the lighting kits here.
We now have added a bonus miniature of the ship and the Notinante configuration! Enjoy!
Traveller Commercial License - Add-on
USD 250.00
We realise that many Traveller fans may not have access to a 3D printer. While anyone who purchases our STLs has the right to get their files printed somewhere, we have worked alongside Far Future Enterprises to provide a commercial printing license as an add-on for small 3D printing companies.
This takes the form of a special add-on which extends your non-commercial license for anything purchased in this crowdfunding campaign (including older 2nd Dynasty models) for a period of 1 year from purchase. During this period, anything you print may be sold, although under no circumstances may you sell or redistribute digital files. You may of course sell items you have printed after the expiry period, so long as they were printed during the licensed period.
This license is for small-scale operations only. You may not produce molds or sublicense production to a third party.
For the last four years, 2nd Dynasty has designed original content at 28mm scale for the 3D printed tabletop, inspired by your favourite science fiction. Now, for the first time, we are pleased to announce our official partnership with Far Future Enterprises, custodians of the Traveller roleplaying game, to bring you the first in what is hopefully a long line of official Traveller starship and character miniature designs for your home 3D printer.
The first offering is perhaps the most iconic ship design from the Traveller universe, the Type S Scout/Courier. Although many iterations of the Type S have made their appearance over the last 44 years, our 3D printable offering is based off of the Murphy-class Type S Scout/Courier deck plans featured in the 5th edition of Traveller, T5.
THIS IS FOR 3D PRINTING
By pledging for any item in this campaign, you are pledging for digital STL files, the blueprints, if you will, to print your own Type S or Travellers. You need access to your own 3D printer or a 3D print service in order to print them out. We do not sell completed ships.
See the section on 3D Printing for more details.
PLEASE NOTE: By pledging, you gain immediate access to the core Type S and/or Crew Miniature STL files! Unlike Kickstarter, you are charged directly, but also equally have access to everything available today (barring certain add-ons and stretch goals). For more details, please read the FAQ before pledging. Happy printing!
We realise that a ship of this size is a big investment. Therefore, we have provided some sample pieces for you to download for free and test print. This includes our cockpit, some chairs and a relaxed pose of our heroic Traveller, Jade.
DOWNLOAD HERE
In addition we have a free miniature from our long time collaborator, Papsikels for all of our
backers*:
PAPZ INDUSTRIES DALOY 9 SENTRY DRONE
*Free miniature will be sent via email within 48 hours of pledging
Backers will also receive an exclusive 60% discount code off Papsikel’s whole store!*
*Discount code will be sent via email within 48 hours of pledging
The hero of this crowdfunding campaign is the iconic Type S Scout/Courier, a vessel in the Third Imperium that is as ubiquitous as any other. A tried and true design made for the Scout Service, most Type S models are surplus Scout Service vessels or retired service vessels that are often owned or co-owned by retired scouts, and may be called up in times of war.
Some are more or less the same specs as the military scouting variant. Others are gutted out and retrofitted for mining activities or bounty hunting. Whatever the purpose, the Type S is a fast, Jump-2 capable vessel that is easily able to refuel itself in bodies of water or gas giant clouds.
The Type S comes in two scales: 28mm and 15mm. The 28mm is fully detailed and optimised for printing on FDM printers. All ship stretch goals are compatible with this version.
The 15mm version is a standalone ship designed for easier printing at a smaller scale. It sacrifices some of the detail for ease of printing on both FDM and SLA (resin) printers. This version is almost half the size.
What is a ship without its crew? If you are going to enjoy the Type S at full 28 mm scale, you are going to need some great 3D printable miniatures to go with them. Our last run out, we had great success working with Papsikels creating the crew of the Sleipnir, which featured a number of dynamic poses.
Painted by David Woods of DWartist modelling and painting
This time around, we have some crew members for the Type S, but also some great and iconic Traveller characters to people your universe.
Although we will have some combat-oriented miniatures, our focus will be on providing many non-combat alternatives.
HEROIC MINIATURES
Our Heroic Crew, from Left to Right: Doc, Asha, Jade, Marshal and Nat
Heroic miniatures vary from standard miniatures in that they will feature additional poses that we will unlock as the campaign progresses.
VARGR AND FRIENDS
A lineup of Vargr combatants from Flavored Pickle
Creature sculpt artist Flavored Pickle brings us a collection of Vargr pirates and soldiers in a variety of action poses. Although these guys will not have the wide variety of poses to unlock, as the campaign continues, we will add additional miniatures to the line up of Character Stretch Goals.
We had originally planned to present both the Type S and the Type A Free Trader Beowulf in this campaign. Unfortunately, we ran out of time to give the Beowulf a just rendition this time around, and thus it will premiere towards the end of the year in its own campaign, provided all goes well in this one.
The Beta Centauri is a 2nd Dynasty design that has been converted toTraveller specs
However, we struck a compromise by converting one of our existing ships to a special variant designed specifically to fit into the Traveller universe. Presenting the Beta Centauri, a compromise between the speed of the Type S and the utility of the Type A Free Trader. It is an underweight 200 ton ship.
with parts compatible with out Scout Ship Beta 3D Printable Starship, we have both upgrades for those who already own the standard Beta, and standalone ships for those joining us for the first time.
The original Scout Ship Beta was featured way back in Starship III, our third Kickstarter in 2018
The Beta has a new variant of the upper deck which features a raised bridge, crew quarters and a small air raft garage. The fuselage features an extended hull and cargo bay, fuel scoops instead of retro thrusters, and replaces airlocks with the familiar iris doors of the Traveller universe.
The Beta Centauri is not at a printable state at the moment, this is just a 3D rendered concept.
So here we come to the pledges. By pledging in this campaign, you not only get immediate access to the Type S Scout and Character Miniatures, but your funds go towards financing the unlocking Stretch Goals, which increase the value of everyone's pledge by adding additional bonus items.
The various pledge levels are explained here below, along with a handy chart which gives and indication of what is and isn't included with the pledge.
Get the Type S Scout, Traveller I 28mm Miniatures, Ship Miniatures, all stretch goals as well as the campaign-exclusive add-ons.
Add-Ons are items that can be added to your pledge amount by increasing the pledge amount corresponding to the add-on. Some of them are included with higher pledge levels. Some )
Exclusive Add-Ons = Add-Ons that are exclusive to this campaign, which will be released as the campaign goes on. These items are all designed with Traveller specifically in mind, and include Imperial Marines in Battledress, T5 styled Turrets, some variants of the Air Raft that comes stock with the Scout Ship, and the Beta Centauri, a Traveller conversion of our own classic Scout Ship Beta design, which is featured both as a stand-alone ship and an upgrade for those who already own the Beta.
All the Exclusive Add-Ons are included with the TAS Membership pledge level and above.
The TAS Member – All-In Pledge – includes all Add-Ons listed under Exclusive Add-Ons.
Non Exclusive Add-Ons are add-ons that have featured in our past Kickstarter Campaigns. They are not specifically Traveller licensed products, but they will comfortably fit onto your Traveller tabletop.
Commercial License is a digital license that allows small 3D printing businesses to extend the license for any product in this campaign to be allowed to print and sell copies for a period of 1 year.
Exclusive Add-Ons are Add-Ons introduced in this campaign. These are all included in the TAS Member All-In pledge level and above.
Non Exclusive Add-Ons have featured in our past Kickstarter Campaigns. This is often the cheapest way to pick up our past collections including their related stretch goals which are otherwise presented as products on My Mini Factory.
Following the tradition established in our last Kickstarter, we are offering built-in lighting for the Type S. The light kits are designed by Brian "Zoromer" Heiberger, or resident light guru and 3D printing expert.
Click to order a lighting kit
During Starship V we found our delivery process quite unwieldy and mistake prone. Therefore, this time we have chosen to keep it wholly separate from the crowdfunding campaign.
To order light kits for your Type S, click on the images below, which will take you to 2nd Dynasty.com where you can then order your light kits directly through our distributor who handle every part of the transaction.
At the moment, only the standard Type S is supported with light kits, but we may add additional configurations as stretch goals go into production.
As with all of our past crowdfunding campaigns, we like to set the goal for our project low, and then for each milestone we hit with funding, we release a new, free item or items, known as stretch goals.
In our case, we will be following the progress of our Type S as it makes it's way through the edges of chartered space, making new discoveries (and releasing new stretch goals) along the way.
Stretch goals are included free with any pledge that includes them. Every pledge includes at least one type of stretch goal (character or ship). So the more successful the campaign is, the more goodies you get, and the more the Third Imperium comes to life on your tabletop!
We have a small but growing list of officially licensed printers. Below we list the printer, location they are shipping from, website and contact details (if applicable), and lead time if listed (time from an order to fulfilment, usually in weeks).
Arcane Llama Heavy Industries | Fresno, California USA | Ebay Store | Contact
Artharian Gaming | Ohio, USA | Website | Contact | Twitter | 3 to 4 weeks
Canvas Temple Publishing | La Plata, MD USA | Website | 3 to 4 weeks
Just Print It Online | Brighton, UK | Website (coming soon) | Contact | 3 to 4 weeks
Proteus 3D Modelling | Swansea, UK | Website | 3 to 4 weeks
Felix Platz 3D Print | Germany, EU | Website
PRINTING THE TYPE S AND OTHER SHIPS
In order to print the Type S Scout yourself, you will require access to an FDM printer or a 3D printing service. The designs should be fully printable in PLA, ABS, PETG or PEI, and have been test printed in PLA and are designed for that material.
We have printed in Prusament PLA (Galaxy Silver) at 150 microns on Prusa mk3 series printers and using 8% infill, 5 bottom layers, 7 top layers, and 2 wall layers.
PART SIZES
The parts are medium sized and might not be suitable for all printers, so before pledging, ensure that your printer can accommodate the largest part of the ship.
The ship has been designed to be modular and clip together using the OpenLOCK clip available free from Printable Scenery (get the clip as part of the package here).
- Tested on the Prusa i3 MK3 and MK3S with a 0.4 mm nozzle at 150 microns
- Largest Part is 181.9 mm (7.2"), can be rotated to 146.5 mm (5.7").
Large parts can be sliced smaller in your slicer or cut up into parts and glued together. However, you will have to do this on your own.
OPTIMIZATION, PRINTING TIPS AND PRINTER PROFILES
The following tips are primarily for FDM printers.
The orientation the STL files come in should be already in the optimal orientation for printing.
We have endeavoured to keep the parts as support free as possible. You should only need to add supports for door frames and overhangs greater than 70 degrees. These should be far and few between, but good examples are the turret ring and doorways.
We recommend you print with a heated bed, PLA, a flat print plate (such as the smooth magnetic springboard for the Prusa mk3 series), and a built-for-purpose adhesive such as 3DLAC. The idea here is to minimise curling, as many of the parts are dense and take quite a while to print.
We have worked with Zoromer's Support Channel to produce several printer presets for Prusaslicer and Cura ideal for printing our ship parts. These profiles are '
For slicers, we always recommend Prusaslicer , even for non-prusa printers (most current third-party printers are supported). The slicer is cutting edge (with new features, such as part ironing support), has excellent options for adding automatic or placeable supports, is under constant improvement, and offers a robust solution for all skill levels. It also can be used for both FDM and SLA printers.
SLA PRINTERS
Although it is entirely possible to print out the Type S Scout on an SLA printer with a big enough print bed, skillset and patience, we are unable to provide support for resin printers at this time.
Parts will require hollowing out with drainage holes, and some walls might be so thin as to easily cause warping without proper and knowledgeable curing. This became an issue during the review process where one reviewer scaled the ship down to 15mm, but a dedicated hobbyist will be able to accomplish this and address the issues.
In addition to quality concerns, our primary reason for not recommending SLA printers is the material costs. The Type S weighs ca. 2.5 kg fully assembled. PLA material costs are in the range of $50 for good quality PLA spools. Resin is 3-5 times this cost, and it would almost be more economical to purchase a lower priced FDM printer and print the ship than pay for resin materials.
Of course, the ship can be scaled down to half size (ca. 15 mm for example, is only around 600 grams for the whole ship) to make the costs more reasonable.
PRINTING THE CHARACTER MINIS
The character 28mm miniatures will print very well on SLA/DLP resin printers. They can be printed with fine tuned FDM printers with decent results, but will require rotation and supports.
The 28mm miniatures have been test printed on SLA resin printers such as the Anicubic Photon S.
The Type S is scaled for ca 28mm (~1:59) play, where one 1.5 m tile = 25.4 mm (1 inch). We are aware that classic Traveller scales were 15mm, and it is entirely possible to scale the ship down to this level. You may have some issues with thin walls and doors. We are looking into providing some solutions for printing so small, such as amalgamated parts, and built in doors and walls with no door cavities.
As a guide, you can see the table below to see the expected length and weight of the ship at particular scales, and the percentages are what you need to rescale the parts to to meet that scale. These percentages are also used for miniatures, although please note that built-in supports are designed for 28mm prints, and may fail at scales smaller than 28mm (but should work at higher scales).
By 28mm, we mean the traditional height of a miniature of 6 foot (182 cm)
Please note, that we will only be supporting 28 mm scale, as this was the scale that was originally intended.
Keep in mind, that the OpenLOCK clips will also need to be scaled up or down, but that there might be some discrepancies of scale between the clips and the clip holes that need to account for the breathing room that is in the clip holes to allow for print errors.
I would recommending scaling an additional 1% more (scaling up) or less (scaling down) and starting from there when it comes to the clips.
We have a small company here in Trollhättan, Sweden here at 2nd Dynasty, but we also have a growing team of international collaborators supporting us from around the world, from the United States of America in the west, to the Philippines in the east.
Ben Mowbray: Lead Designer and Modeller | 2nd Dynasty
Modellers: Ben Mowbray, Albin Larsson, Mikael Blomkvist, Theodore Williams
Sculptors: Papsikels ( Patreon , MMF ), Flavored Pickle ( Patreon ), Andrei Lanes/Kyoushuneko Miniatures ( Patreon , MMF )
Painters: Brian Jenkins, David Moore
Set Design & Production: Mikael Lindbom | Dockhus Animation Studios
Film, Editing and Photography: Hannes Knutsson | Lefvande Bilder
Lighting Kits: Zoromer - Brian Heiberger
Deck Designer: John Christian
Digital Logistics: Lise-Lott Eriksson | 2nd Dynasty
Prototyping: 2nd Dynasty AB, Proteus 3D Modelling
Far Future Enterprises/Traveller License: Marc Miller
Please note, that we are only able to offer support and answers during daytime hours here in Northern Europe. We thank you for your patience.
The files provided come with a non-commercial print license, which allows you to print out as many copies of our STL files as you like, but you may not sell them for profit.
In addition to restrictions on selling printed items, the license does not allow you to modify or redistribute the files in any way without the express written permission from 2nd Dynasty.
COMMERCIAL PRINT LICENSING FOR 2ND DYNASTY PRODUCTS
For our own original content, we are able to offer a commercial print license via our Patreon. We use Patreon as a licensing method, read more here:
https://www.patreon.com/2nddynasty
COMMERCIAL PRINT LICENSING FOR TRAVELLER PRODUCTS
We realise that many Traveller fans may not have access to a 3D printer. While anyone who purchases our STLs has the right to get their files printed somewhere, we have worked alongside Far Future Enterprises to provide a commercial printing license as an add-on for small 3D printing companies.
This takes the form of a special add-on which extends your non-commercial license for anything purchased in this crowdfunding campaign (including older 2nd Dynasty models) for a period of 1 year from purchase. During this period, anything you print may be sold, although under no circumstances may you sell or redistribute digital files. You may of course sell items you have printed after the expiry period, so long as they were printed during the licensed period.
This license is for small-scale operations only. You may not produce molds or sublicense production to a third party.
LARGE SCALE PRINT LICENSING
For enquiries about a commercial license that covers more than the restrictions of the Patreon license or Commercial Print License listed above, please contact us via direct message.
Thanks to MMF crowdfunding, for the first time ever, we are able to offer immediate delivery on all of the files that we currently already have prototyped and printable. This includes the base Type S (but not stretch goals), the base character miniatures (but not all stretch goals) and the Deck Designer software.
Although we have visualisations of the stretch goals we have on offer, they are merely digital sketches, and it will take several months to deliver all of the items to a high quality standard and printable state. These stretch goals will released weekly in the order they are unlocked until we have released all stretch goals.
DELIVERY SCHEDULE
LAUNCH
When you pledge, the following items will immediately be available:
- Type S Scout/Courier base ship
- Character Miniatures
- Imperial Star Marines in TL15 Battledress
- Pre-Existing 2nd Dynasty designs (Non-Exclusive add-ons)
DURING THE CAMPAIGN
- Most of the miniature stretch goals will be released during the campaign
AUGUST-SEPTEMBER
We will have a brief hiatus for summer downtime whilst we work on making stretch goals and new items printable.
- Type S ship stretch goals
- Beta Centauri
- Outstanding Items
We love engaging with our fans, and it is fan feedback which lets us know what you guys want to see from us in the future!
At our website 2ndDynasty.com you can see our wide range of starships and other STL-objects.
We have an active Facebook community, both on the official 2nd Dynasty Facebook Page, and the 2nd Dynasty 3D Prints Group.
Feel free to follow us on Twitter.
Discord is probably the platform I am most on personally, where you have the best chance to see what I've been up to, ask questions or hang out. You can find 2nd Dynasty here on Discord. We post often also on the MMF Discord.
We have a Twitch channel with our production sessions from our live streams. So follow us there if you want to see more behind the scenes during the campaign.
We have already launched and delivered five successful kickstarters since 2017. All of the initial files offered are already made and printable, so are ready for direct delivery as soon as you hit the pledge-button.
The risks are in the delayed delivery of stretch goals, add-ons and additions created during the course of the campaign. Historically, we have had some delays, but generally not by more than a few weeks. We tend to do staggered releases, making available STLs as they are completed on a weekly basis.
These are uncertain times with COVID-19 still affecting business, this can have unforeseen consequences, but the last year has actually been generous to our business. If I, or my staff get sick, it may lead to delays. Having said that, we live in a small town and are taking every precaution to limit COVID-19-related issues, and should receive our vaccinations in the next three months.
Sustainable materials
The decision to use sustainable, biodegradable plastics is left in the hand of the consumers. Eco-conscious backers will be able to print in a variety of materials that break down quickly in the correct environmental conditions. When not stored in a cool, dry place, the standard materials we ourselves use to print can break down quickly.
Environmentally friendly factories
Since our designs are made to print on your own home 3D printer, the environmental impact is much lower than mass-production on an industrial scale. Only ever what is needed is printed by the consumer themselves.
Sustainable Distribution
Digital distribution eliminates the need for wasteful packaging, shipping and indirect support of unethical regimes.
FAQ
Where can I find my discount code?
If you are eligible for redeeming a discount code* (early sign-ups, previous backers & patrons), the
discount code can be found in:
- Your MyMiniFactory Inbox
- MyMiniFactory Newsletter
or email*
- Through 2nd Dynasty’s marketing
*If you believe that you should have received a discount code, please check your junk email/Spam folder.
DELIVERY SCHEDULE
LAUNCH
When you pledge, the following items will immediately be available:
- Type S Scout/Courier base ship
- Character Miniatures
- Imperial Star Marines in TL15 Battledress
- Pre-Existing 2nd Dynasty designs (Non-Exclusive add-ons)
DURING THE CAMPAIGN
- Most of the miniature stretch goals will be released during the campaign
AUGUST-OCTOBER
We will have a brief hiatus for summer downtime whilst we work on making stretch goals and new items printable.
- Type S ship stretch goals
- Beta Centauri
- Outstanding Items
When will I be charged?
You will be charged immediately after a pledge has been made or an add-on has been purchased. You can review your order on the Order Details page.
Where can I review the pledge that I purchased?
You can review your pledge under the “Pledge tab” of the campaign. Your files can be found in your “Library” (under 'Campaigns') on MyMiniFactory or Order Details page.
How Can I Upgrade My Pledge?
Your pledge can be upgraded simply by backing any other pledge. You will only pay the difference of the cost of the pledge.
I backed at the wrong pledge level, is there anything I can do?
If you back the wrong pledge level, you can upgrade it (read above). If you wish to cancel your pledge, please contact MyMiniFactory at info@myminifactory.com.
What are Stretch Goals? Are these STLs included in the pledges?
Stretch goals will be unlocked when the campaign reaches a certain amount of the total funding. You will receive most of the unlocked miniature stretch goals during the campaign
Where can I change the setting of Notifications?
You can update your notifications settings in Settings > Notifications
By default, you will only receive a notification if you leave a comment and another user replies to your comment.
If you want to edit your notifications settings, please click all the boxes under the “Crowdfunding” section in your Settings > Notifications
How will I know if there’s a new campaign update?
When there’s a new update from the designer, it can be found under the “Updates” section of the campaign. Backers will also receive a notification when an “Update” is published.
You can also comment on Updates by selecting “Read More > View on Community Stories” at the footer of each update.
I have questions about the files, who can I reach out to?
If you have any further questions about the content in a pledge, please reach out to the creator of the campaign, or leave a comment in the comments section.
I need assistance with my payment or other issues, what can I do?
Please Contact Us if you have any issues with payment. Once we receive the ticket we will get back to you in 3-5 business days.
Will you be making other ships from the Traveller universe?
Provided that this campaign goes well, yes. Our plans are to release the Free Trader Beowulf towards the end of the year.
Will you make tactical miniatures for ship to ship combat?
Yes, but we plan to do this in later crowdfunding campaigns.
Will you make this ship and other items in 15 mm or other scales?
The beauty of 3D printing is that you can rescale yourself. We have provided a table of different scales and scale percentages if you would like to print the ship or miniatures at a different scale, ranging from 15mm to 35mm. However, scaling down, you may run into some issues with thin walls. We will consider supporting this in the future, perhaps as a stretch goal, as 15mm is a popular Traveller scale, but no promises.
Will you support resin printers for the ship?
Not directly no, although it is possible to print on resin, our experience is with FDM. It is entirely possible to print the ship in resin if you know what you are doing and don’t mind the extra costs in materials (resin is 3-5 times the cost of PLA in volume). We don’t know enough about resin to support it. We also will not be making parts smaller to fit smaller printing beds, so please check your print bed size against the recommendations in the printing section of the campaign page.
Do you take commissions for ships?
No. We have put over 1000 hours of labour into the Type S design. We also have our studios in Sweden, where living is quite expensive. We don’t want to ask any fans to mortgage their house for our talent, and any ship we make has to make financial sense for us to invest the time. Truthfully though, we are going to be very busy with the Traveller license for the next few years, which makes commissions impossible.
Do you take commissions for miniatures?
We work with a talented team of sculptors that each have their own patreons and may be open to
commissions. Although it does not take hundreds or thousands of hours to design a character
miniature,
it does take several days to sculpt, and you can expect commission prices to respect that. For a
commission, we recommend you contact our sculptors directly via their Patreons.
Papsikels
Flavored Pickle
Kyoushuneko Miniatures
Commercial Printing (Merchant) License
By purchasing the Commercial Printing License add-on, or the Traveller Commercial License pledge level, your non-commercial license is extended to allow you to print and sell your prints made during a period of 1 year from the purchase of the add-on/pledge. If you build up a stock during this time, you of course are within your rights to sell those products even after the license period has expired.
This license applies to any STL files included in this campaign that you have purchased, but does not extend to other 2nd Dynasty or Traveller products. Neither does it apply to the free miniature on offer by Papsikels.
You may not under any circumstances sell or redistribute any digital files.
This does not allow you to make molds and mass-produce items purchased as a part of this campaign. Mass production is beyond the scope of 2nd Dynasty AB’s Traveller license agreement and would require additional and direct contracts between 2nd Dynasty and Far Future Enterprises.
Thank you for supporting 2nd Dynasty and the 3D Printing Community!
Please update your notification settings if you want to get notified when there is a new comment.